hi please help me
I GOT A WORK FOR IPHONE 6S ITS APPLE LOGO RESATRING AND IWILL TRY TO CHANGE IOS BUT STILL ITS SHOWING APPLE LOGO AND I AM REMOVEING TOTHA FRONT CAMARA STRIP ITS LOADING MAYBE ITS MOTHER BOARD PROBLEM ANY ONE TELL ME KNOW THA SOLUTION PLSS THANKU FOR HELPING ME :)
Is this a good question?
Rep: 221.4k
15
289
806
No need to go ALL CAPS…that’s considered shouting ;>).
If I understand correctly, you are saying that the phone re-starts when the FCAM & Sensor flex is connected but boots fine when the flex is disconnected. If that’s the case, and I will assume you have already tried a new flex, then start by probing the FCAM FPC connector (J1111) against a known-good device or the values in ZXW. One of the four circuits is problematic (FCAM/ALS/PROX/EARSPEAKER). By probing the connector, you should see which one is causing the issue. Then you can route yourself upstream in the circuit and determine the root cause.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 24
