Fix Your Stuff Community Store

Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 8, 16 or 32 GB capacity / black or white plastic back.

1500 Questions View all

Options

do I need to be grounded when replacing the back cover?

i have to replace my white backing cover for my 3gs. i was wondering if when doing so i need to be grounded so i dont destroy the phone, especially as i am dealing with the memory and mother board unit.

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score -1
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

Short answer: no.

Long(er) answer: This is mainly just an issue with desktop computers, when you have the tower opened and if you become charged (do not work on a carpet!) and you touch a PCI port they commonly get fried. Still, I don't wear a grounding strap when working on computers or other electronics, and mainly just use common sense. Just swapping out the rear panel you do NOT need to wear a grounding strap.

Was this answer helpful?

Yes No
Score 0

3 Comments:

though just remember you're liable for any and all damage you incur whilst performing your own repair.

by

I never wear a grounding strap.... Just make sure you "slide to power off " before removing LCD or it will blow...

by

Also, if you're uber-paranoid you can work on an antistatic sheet (just cut open an antistatic bag)

by

Add a comment

Add your answer

josh will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 652