Skip to main content

Released September 22, 2017. Model A1863, A1905. Available as GSM or CDMA / 64 or 256 GB / gold, silver, and space gray.

222 Questions View all

Help identify iPhone 8 logic board components

I have an iPhone 8 that will not come on I’ve identified one of the components close to the battery port connector (RV3C002UN) but am having trouble identifying another component to its immediate left. A mirror/silver like chip was actually broken and without a schematic it is very difficult to identify. If anyone could possibly help it would be greatly appreciated.

Answer this question I have this problem too

Is this a good question?

Score 0

Comments:

@blaked89 you can make this "the components close to the battery port connector"and "A mirror/silver like chip " a lot easire by posting a picture with the broken component marked. that way people like @refectio can probalby identify this in no time at all. Use this guide Adding images to an existing question to post some images.

by

Ok thanks, until recently I only read posts but I finally found an issue I could not find myself so I just had put the question out. So first post here. I could upload a picture tomorrow if the pads on the board but the component itself was more or less shattered. The schematic from Minho seems to be the one I’m looking for But I will certainly let everyone know once I find out. I didn’t read his post till after our shops close.

by

Add a comment

MacBook Battery Fix Kits

Starting at $69.99

Buy Now

MacBook Battery Fix Kits

Starting at $69.99

Buy Now

1 Answer

Most Helpful Answer

In general, a shiny glass component is usually a diode or a MOSFET. Check the screen capture of the iPhone 8 Plus schematic below. There is very little difference between regular and plus models on the basic circuitry.

Block Image

Was this answer helpful?

Score 1

Comments:

Thanks, I really appreciate it. I’ll look into it as soon as possible and let you know if I can find it.

by

So i believe it is a TVS but I dont want to post the number/name of the component until I am %100 sure that’s the component that was damaged. Customer is becoming anxious, not sure if I will still have the phone by the time the part comes in. Very fine time limit I am working with lol

Thank you so much for the information and schematic but I do not want to mislead anyone. Will have to update you when it is confirmed. I do apologize.

by

Were you ever able to identify the name of that shiny glass component?

by

Add a comment

Add your answer

Blaked89 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 8

All Time: 118