If I put my washer onto a cold/cold cycle, my clothes still come out hot. I even shut off the hot water inlet going into the unit to prevent this. Could this be a ATC problem?
Is this a good question?
Rep: 685.3k
3.4k
1.1k
2.6k
Sounds like you're getting hot water from the cold water inlet. This could happen if the water hose connections have been reversed. Try running on a hot cycle, if I'm correct the water will be cold.
Was this answer helpful?
I will try this tonight - crazy how something like this could possibly be so simple. Thanks very much!
Occam's Razor - The principle is often inaccurately summarized as "the simplest explanation is most likely the correct one." But it works.
Thank you. Will check this out. Never even thought of that!
sounds like your mixer is bad. I had that happen and just turned off my tankless water heater to get cold water when I realized my mixer was bad
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 1
Past 30 Days: 3
All Time: 4,243
