Fix Your Stuff Community Store

Repair information and guides for the iPhone 6S released by Apple on September 25, 2015. Models: A1688, A1633

2687 Questions View all

Options

iPhone got a few drops of water in now lcd's wont work

my iphone 6s got a few drops of water in it , i disconnected battery and left it to dry for 3 days , switched back on , worked for a min , then lcd turned off , so i got a replacement screen tried it on another iphone 6s first , then plugged it in to the water damaged phone and no display , but the phone works , i restored it via itunes , etc can hear it ringing etc , just lcd will not work , maybe damage to motherboard , but where do i look , thanks for any help

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

Shine a bright LED flashlight at the screen and boot it up to check for a bad backlight. It seems likely that your backlight fried. This is not a bad repair as far as board work goes, but not one to attempt unless you are well versed in micro soldering and have a good setup for it.

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

shaz will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 31