Rep: 93
3
12
iPhone 7 home button after lcd replacement, have damaged ic U10 by shorting the button. Looking under the microscope the home button, I notice that the integrated u10 was chipped, so I replace it with a new one. the button is now recognized but the click does not go, I changed 2 Ic but without solving. on the flat home button I have all the voltage drops. What could it be ? flex damaged?
Is this a good question?
Rep: 221.4k
15
289
807
It looks like the flex sustained some damage when you removed the IC. I would double check the condition of the flex and if you have another U10 IC, try that as well.
Was this answer helpful?
I replaced u10 without solving. the flex visually does not seem damaged. and I have all the resistors on the fpc touch id connector
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 45
