My clothes always feel warm when removing them from the washer. I have felt the water coming into the washer on the cold setting and it feels hot. So I turned it to hot thinking the hoses were switched and it felt cold but as soon as I close the lid to the washer you can hear the water change and if you quick open it back up the water feels hot again. What could cause this?
Is this a good question?
Rep: 512
9
1
Is this a brand new hookup? Is there a chance that the plumber ran two hot lines to the washer (unlikely). Check the manual to see if it says anything.
My Maytag washer can do warm or cold wash and then warm or cold rinse as well. There might be more than one temperature setting depending on the type of cycle. For example if it is set to "whites" a lot of time that is warm or hot water. Try a darks setting if there is one.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 6
All Time: 1,585
2 Comments
My washer is GE brand and it is only a couple weeks old by the way.
by Scott Buist
No it is just an updated appliance not a new hookup. It is also set to colors not whites. I just don’t understand why the water feels cold when the lid is open and hanged once it closes. I also looked and my washer says that all of the rinses are cold.
by Scott Buist