Rep: 49
2
1
I have an Apple Watch Series 3 A1861 GPS & Cellular
I replaced the screen by myself. The touch is working 100%, But I Needed to reset my device and after that my watch is not pairing with my iPhone.
Help me!!
Is this a good question?
Rep: 11
1
This is a bit of a dated reply but when I replaced a series 3 screen (see my ifixit repair guide) the display worked but I didn’t have touch and I couldn’t pair the watch. I re-opened the watch and reseated all of the ribbon cables. To my delight I was able to get touch and also pair the watch. The issue may be not having all of the ribbon cables seated properly.
Was this answer helpful?
Are you getting pop up message like pairing failed on iPhone screen
while trying to pairing?
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 6
Past 30 Days: 10
All Time: 1,852
What screen did you use?
by Dan
I bought in Aliexpress : https://pt.aliexpress.com/item/For-Apple...
But now i cant pair my watch to phone
by Bruno Mariante
I think you'll need to get a replacement from them.
by Dan
I strongly recommend getting a refurbished screen off eBay or just get the one that iFixit recommends
by Mahir
I did buy a refurbished screen from eBay but my won’t power on ? Any suggestions to what I do for that ? Series 5 replaced the screen.
by Debra Dawson
Show 1 more comment