Skip to main content

Released June 2014, identified by model number B051.

32 Questions View all

Wires lifted-up on BEATS SOLO 3 - I need the wiring diagramm


On my Headphone BEATS , Solo 3 :

The soldered wires , on the jack side, have been pulled. I do not know which wire (green, blue, red, pink, pink/pink) should be soldered on which plot (8, 9, ....12) ?

Look at the picture.

A picture of a still soldered device would help me a lot !

Many Thanks

Mise à jour (08/07/2018)

now with the picture , hopefully !

Block Image

Additionnal question; is it a real or a fake ?

Answer this question I have this problem too

Is this a good question?

Score 0


hello everyone.if some of u have.ı need electronic diagram of beats solo 3 wireless headset.hugs from turkey.thanks in advance


Add a comment

2 Answers

Most Helpful Answer

Hi @olipoul ,

Regarding whether your headset is real or fake. Does your speaker look like the one in the image below?

Here’s some links to two videos, video1 and video 2 showing the teardown of a Beats Solo 3 headset.

Here’s an image (enlargement taken from video one) showing the wiring connections. Admittedly it is not as good as your picture but hopefully you may be able to grab a better picture from the video and enlarge it even more to get a better view of the wiring.

Block Image

(click on image to enlarge for better viewing)

Hopefully it may be of some help.

Was this answer helpful?

Score 2


Hi Jayeff, Thanks for your answer; I knew these videos. I did not want to open the rest for the moment. In any case Thanks


Add a comment

Hi Oliver, looking out your picture i think those are fake, you wrote at the title beats solo 3 and now they are made by apple, these is a picture of the real ones main board.

I wish you the best of luck!!

Was this answer helpful?

Score 0
Add a comment

Add your answer

Olivier Poulat will be eternally grateful.
View Statistics:

Past 24 Hours: 2

Past 7 Days: 11

Past 30 Days: 36

All Time: 1,406