Skip to main content

Model number: IMW477-DR. This bluetooth speaker features an IP67 rated waterproof design with an on-board microphone. Available in black, blue, gray, green, and red.

7 Questions View all

How to replace usb charge port. Where are these parts to buy

How do I replace the USB charge port and where do you find these parts in these pictures

Answer this question I have this problem too

Is this a good question?

Score 3

Mine is broken currently and soldering the USB charge port back on looks like a pretty difficult venture.


Just took mine apart and the inside of the charging port fell out, immediately. Placed it back in and it's charging now...I know I'll have to solder, or at least glue, but doesn't look to hard at all. Just rip it open and get busy


la lia ya no sirve el puerto de carga .se aflojo y el cargador ya no queda bien y desde entonces deje de usarla. Pero quiero repararla ,mas no se si se pueda ,reparar


The speaker don’t charge

=== Update (06/27/2020) ===

The speaker model IMW575 don’t charge


imw581 charging port for my altec


Show 3 more comments

Add a comment

2 Answers

Most Helpful Answer

@pinkxster looks like it may be a fairly standard micro USB charging port. Open it up using these guides Altec Lansing Mini Lifejacket 2 Repair . Check if the port is just loose on the board and may be it can be soldered back in position. Replacement ports are available at places like this or on here. Check videos like this and this one to see what is involved with that.

Was this answer helpful?

Score 1

1 Comment:

Puerto de carga averiado


Add a comment

Altec Lansing charging port.lifejacket jolt model:IMW581L.

Was this answer helpful?

Score 0
Add a comment

Add your answer

Alton Smith will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 5

Past 30 Days: 36

All Time: 9,391