Rep: 1
1
was fixing my iPhone 6 housing, battery and screen. because it was broken. and after I install it all. the logic board are getting really hot when I turn it on and the screen does not work ( I have tried the screen on another iPhone and it works fine)
Is this a good question?
Rep: 221.4k
15
289
806
If the logic board is uncomfortably hot, then there may be a short circuit somewhere. Double check your work and check the connectors and flexes for any sign of damage.
If you connect the phone to iTunes enabled computer, does it get recognized? That would be an indication that the device is booting but the issue is with the display. Then check to see if the backlight is on. Bring the phone in a dim or dark room or look at the edge of the screen. If the backlight is not working, then shine a bright light on the screen to see if you have a dim image.
Was this answer helpful?
If the logic board is uncomfortably hot, then there may be a short circuit somewhere. Double check your work and check the connectors and flexes for any sign of damage.
If you connect the phone to iTunes enabled computer, does it get recognized? That would be an indication that the device is booting but the issue is with the display. Then check to see if the backlight is on. Bring the phone in a dim or dark room or look at the edge of the screen. If the backlight is not working, then shine a bright light on the screen to see if you have a dim image.
I have double checked my work. it seems fine.
and I have tried to connect it to Itunes via computer and it said that "iTunes has found an iPhone that is for recovery. You need to restore iphone before you can use it with iTunes"
I can't see any light from the screen or the backlight
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 82
