Fix Your Stuff Community Store

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all

Options

Screen Replaced, tried the phone works, and then dead

Hi everyone, i was replacing the screen on an iPhone 6, i replaced the screen, and then i tried the screen with the iPhone open, everything was working except the home button and when i click it the iPhone just died and it wont turn on Again.

When i try to solve the problem i noticed the cable of the home button wasnt correctly in place.

During the procedure i didnt disconnected the battery cable.

Now the phone wont turn on and neither is recognised by the PC when i try to connect it.

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0

1 Comment:

When i put in charge the phone it gets hot

by

Add a comment

2 Answers

Filter by:
Most Helpful Newest Oldest

Options

Try disconnecting the battery and plug it back in again and see if you can power on.

Otherwise if that does not work try unplugging the home button extension cable near the screen connectors and try turning on without that.

Was this answer helpful?

Yes No
Score 0

2 Comments:

Nothing, i've tried to disconnect the battery, and it doesnt work, and i've also try to unplug the cable but nothing.

by

P.S. When i put in charge the phone it gets hot

by

Add a comment

Options

It sounds like the backlight is dead. Do you see anything on the screen if you try point a flashlight towards it?

Was this answer helpful?

Yes No
Score 0

2 Comments:

Nope, i see nothing.

by

P.S. When i put in charge the phone it gets hot

by

Add a comment

Add your answer

Giorgio Bevilacqua will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 37