Skip to main content

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all

iPhone 6 keeps vibrating after answering call

Hello everyone,

iPhone 6 keeps vibrating after answering the call, time counts on screen and no sound can be heard on speaker and on earpiece, also other person wont hear you.

In very rare case the call is successful and everything works fine, but most of time problem occurs.

I know it is logic board problem.

I read that it could be Qualcomm WTR1625L RF transceiver, but maybe anyone fixed this problem and can tell more about possible solutions maybe it is not RF Transceiver? Thanks all, hope I will get help here!

P.s.

No water damage.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
1 Comment

Anyone? any help appreciated

by

Add a comment

3 Answers

Chosen Solution

It appears to me to be more audio related issues than "radio" (RF) issues. If the call is connecting properly but no sound to or from the receiving end occurs, I would suspect the Audio IC (U0900).

Was this answer helpful?

Score 2

1 Comment:

i have this problem , and so far i have replaced "Audio IC" , WTR , BB_PMU , and also i have reballed BB_CPU , but the problem did not go

by

Add a comment

Did you ever figure out the answer? I’m experiencing the same thing and no one seems to have the answer

Was this answer helpful?

Score 0
Add a comment

I had the same issue and replacing a WTR1625L helped. At first I replaced the Audio IC, but it was still the same.

Also L4512_RF was knocked off, but I think it was while removing the IC.

Was this answer helpful?

Score 0
Add a comment

Add your answer

Madness will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 4

Past 30 Days: 19

All Time: 2,470