Skip to main content

Released September 25, 2015. Model A1687/A1634. Repair of this device is similar to previous generations, requiring screwdrivers and prying tools. Available as GSM or CDMA / 16, 64, or 128 GB / Silver, Gold, Space Gray, or Rose Gold options.

820 Questions View all

Replaced iPhone 6S Plus charging assembly

Hello, I recently replaced the charging and auxiliary port assembly on my iPhone 6s plus using third party replacements parts. After replacement, the charging port works (the reason I replaced to begin with) however my auxiliary port plays out only the right half of the output. Is this due to a loose connector or faulty part? I've already tried wiggling the aux cord around to try and get contact for full audio but I don't even hear a partial buzz to indicate it's possible. Thanks!

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution


Chances are the part is faulty. Aftermarket chargeports have a high defect rate, as so many functions are controlled by this flex. I recommend purchasing an original flex off ebay that was pulled from a working iphone. I've never had any issues with a used original part.

Was this answer helpful?

Score 1


%#*@! I had guessed that was the case, I didn't even know their was a market for used parts though so I'll look into it, thanks man!


No problem! Doesn't hurt to double check and make sure your aux cord works fine with other devices


Add a comment

Add your answer

Solomon DellaPenna will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 54