Fix Your Stuff Community Store

Repair information and guides for the iPhone 6 Plus that was released on September 19, 2014. Model: A1522, A1524

1525 Questions View all

Options

iPhone fell down —-> Touch stoppen working

So i was using my iPhone, when it fell down and the glass broke and the touch dindt want to work anymore.

So i bought on amazon a lcd display and replaced everything ( battery disconnected all time ;) ) but its still not working.

Anyone been through this? Or knowing what the problem could be?

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 1
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

It sounds like your phone now has "Touch Disease", it's a common failure on the iPhone 6 Plus.

If you are confident that your replacement screen is fully functional and there is no damage to the Digitizer FPC connectors on the logic board, then your phone probably suffers from Touch Disease. This is not a DIY repair. Look for a repair shop that can do micro-soldering repairs to properly diagnose your problem.

Was this answer helpful?

Yes No
Score 1

3 Comments:

Thanks for your informative answer, appreciate it.

Do you think this can be fixes bu just heating up the touch IC with some flux and 350-370 degrees celsius for some seconds?

by

Check out the link I provided...it is usually caused by a broken trace so reflowing the IC will generally not work or at least, work for long.

by

Minho, i got 1 more question. If i reflow it will it work for at least 2-5 days?

And do you think that someone could do this on his own

I didnt ever have smd soldering or sth like that

But i had normal resistor capacitors soldered

by

Add a comment

Add your answer

Nenadbrateu will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 109