drive belt came off flat idler pulley. it is on top of pulley. belt still on other pulleys. is there any way to put back on without removing mower from tractor.
Is this a good question?
Rep: 3.7k
8
6
3
REF: http://www.manualsdir.com/manuals/632770...
The link above is the manual for your mower for removing the mower deck. If you notice in step 3, the manual removes the belt from the clutch pulley before the deck is removed (steps 4-7). Therefore, if you follow steps 1-3, you should be be able to have enough slack in the belt to reroute the belt around the idler pulleys and back on the clutch pulley without having to remove the mower deck.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 7
Past 30 Days: 9
All Time: 3,764
This question was migrated from https://meta.ifixit.com/Answers.
by iRobot