Skip to main content

Released September 16, 2016. Models A1661, A1784, and A1785. Available in 32, 128, or 256 GB configurations in Rose gold, gold, silver, black, jet black, and (Product)Red.

1364 Questions View all

No celluar signal after phone casing swap

I recently swapped over the phone body for my iphone 7 plus however after completing the swap it does not detect signal at any point, it searches and then just says no signal . I have tried doing a DFU reset and checking all connections on motherboard . Any ideas would be appreciated

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

there are always grounding connections to the housing assuming you have made all those connections correctly and the housing is good quality the only explanation is possible damage caused during the change.

Instead of creating more damage I would take the phone to a decent repair shop ask them to check it for you because otherwise you may cause more damage that cant be repaired.

Was this answer helpful?

Score 0

1 Comment:

Are you able to list all the areas where there are grounding connections?

by

Add a comment

Add your answer

Isaac Legg will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 38