Fix Your Stuff Community Store

Released September 16, 2016. Models A1661, A1784, and A1785. Available in 32, 128, or 256 GB configurations in Rose gold, gold, silver, black, jet black, and (Product)Red.

1364 Questions View all

Options

iPhone will not charge. Charging icon comes up for split second.

I have an iPhone 7 plus that moisture got in and now wont charge, I took the motherboard and cleaned it, replaced the charging port and battery with no luck. The phone does work but as soon as the battery dies I need to change the battery for the phone to turn on. When I plug in the phone the Battery icon comes on for a split second then a message comes up "This Accessory may not be supported" and stopes charging immediately. I'm using multiple apple OEM chargers at 1A, 2A and also 3A. All help would be greatly appreaciated.

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

It sounds like you have a damaged charging circuit on the logic board. The Tristar IC is responsible for communicating with the charge while the Tigris IC is responsible for delivering the current. all of this is powered by the PMIC and managed by the CPU.

Given the error you are receiving, I would tend to think the problem is Tristar related bu t because the phone was water damaged, there could be other issues in the charge circuit as well. This will require a micro-soldering repair .

Was this answer helpful?

Yes No
Score 2
Add a comment

Add your answer

iPhone 3GS KING will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 17

All Time: 1,158