Rep: 23
1
I just replaced the metal backing on my iPhone 7 and after I put it all together it seemed like everything ran perfectly! But then after 8 minutes or so it will reboot itself. The replacement does involve taking all components out of one phone then put it in a new housing. Any ideas as to why it reboots by itself?
Is this a good question?
Rep: 221.4k
15
289
807
It's hard to say, a lot can go wrong with a DIY housing swap. You'll want to double check your work by following this guide. Look for partially or completely torn flexes, improper screw placement (or missing screws), damaged connectors etc.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 52
