Fix Your Stuff Community Store

Xbox One controller was introduced in 2016 with the launch of the Xbox One S and adds Bluetooth support for Windows 10/11. This controller fixes many of the design flaws found on the Model 1537/1697 controllers and is much more reliable. This controller has been replaced with the improved Model 1914 controller.

162 Questions View all

Options

Sync Button came loose

The sync button/switch came loose from the circuit board on my son's 1708. I have the controller apart and the switch handy but it's not obvious if/what contacts to solder. It looks like there are four pads in roughly a _| |_ configuration. Would I solder all 4 ? I've also read to just forget it and use USB to sync.

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

well its a slandered switch so im guessing solder all 4 like with the other two switches rb and lb im more looking for the best method to do this as sync button is so %#*@ small

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

Michael Gallant will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 5

All Time: 318