Dishwasher does not drain on its own at the end of the cycle

So my Dishwasher starts its cycle properly but at the end of the cycle does not drain on its own, but when i turn it off then on again and reset it for 3 seconds it drains the water from the previous cycle. Its weird because there seems to be nothing wrong with the pump itself as it drains when i reset but not on its own after a cycle.

Just some extra info, i use a tank which is connected to the dishwasher directly and thus it takes a longer time for the dishwasher to start its cycle since the pressure is not high (if that's a problem let me know, though i read somewhere it doesn't matter)

if someone could point me in the right direction, i would highly appreciate it.

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment