Skip to main content

How do I install new bluetooth antenna

I have a new bluetooth board and that is easy to install but they unfortunately did not install the antenna at the factory?? So how do I install a new antenna (which can be purchased easily on e-bay) or more precisely where do I route the antenna and where do I attach the other end?

Answered! View the answer I have this problem too

Is this a good question?

Score -1
Add a comment

2 Answers

Chosen Solution

The bluetooth antenna is probably hiding in the corner. Here's the installation guide: iMac G5 20" Model A1076 Bluetooth board Replacement

See step 4 and look in the corner to the lower left of the card, it may be tucked under.

Was this answer helpful?

Score 1
Add a comment
Most Helpful Answer

Kevin,

Every 20-inch iMac G5 I've been in has already had the cable. Did you pull out the power supply to make sure it wasn't tucked away somewhere it shouldn't be? Do a double take before trying to follow these instructions:

http://www.appleselfrepair.info/imac-g5-...

I didn't see a guide for this on iFixit but found that guide via google.

Was this answer helpful?

Score 1
Add a comment

Add your answer

Kevin will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 1,737