LCD has noise/flickering + blue tint
Imac would not start at all. no sign of life.
PSU had several bad capacitors, they were replaced.
iMac starts up, but LCD looks like this.
Is this a good question?
Score
0
470751
1 Answer
Most Helpful Answer
Rep: 479.3k
35
329
971
Then your issue is the display's ribbon cable (LVDS) and its connectors or the display its self
Was this answer helpful?
Score
2
Thanks Dan! Too bad i dont have any LCD or cable to test :(
Most likely its the cable which is cheaper
2 Comments
What does the image look like on an external monitor?
by Dan
Image out the mini displayport on external monitor looks good.
by Anders Laursen