Rep: 11
2
The upper screw which also holds the display assembly is stripped to the point that it's basically round, similar to the bolted screws on the mainboard.
The "rubber" / "glue" methods are out of the question.
Do you have any real suggestions for me?
I haven't tried with a drill bit yet. Should I? If yes, which size?
Is this a good question?
Rep: 685.2k
3.4k
1.1k
2.6k
Are you talking about the screw in step #9 of this guide?
MacBook Pro 15" Unibody Mid 2012 AirPort/Bluetooth Board Replacement
If so try using these: Screw Extracting Pliers
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 200
