2.26 or 2.4 GHz / White plastic unibody enclosure

664 Questions View all

Is it possible to replace the rear speaker connector on logic board?

Hi group, I had to replace the mag connector on a Macbook, I got that done but I broke the solder joint on the rear speaker. I bought a 12 watt soldering iron and gave it a shot but I had too much solder, the connector (metal on the female part is gone) so I want to know if I can buy the connector and try to solder again.

Thanks David

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Take the logic board to an old old repair guy with component level soldering skills and give him $10-$15 to fix it for you. Have it in a static proof bag. It doesn't even have to be a Mac guy.

Was this answer helpful?

Score 2


Great answer!!


Hi I understand that part but I cannot figure out how to buy a replacement connector the old one the pin is not visible, thus nothing to solder to.


the old guy will have some type of connector


Add a comment

Add your answer

Dave will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 723