SOLVED: Phone rebooting / freezing but works when mid frame removed - Samsung Galaxy S6

Phone rebooting / freezing but works when mid frame removed

My phone fell to the floor a few times and now it freezes a few seconds after startup and turns off and on again for infinity.

then i replaced the battery and put the phone together, still the same issue.

now i found out, that whenever i the mid frame is screwed to the device it has that issue, but when i remove the midframe it works.

seems like something is shorting? how can i find out, what is causing this problem?

it never came in contact with water

thank you in advance

Answered! View the answer I have this problem too

Is this a good question?

Yes No

Score 0

Options

Is the mid frame bent?

Maybe try unplugging everything on the logic board then plugging it back in, could be a loose ribbon cable.

The battery is the most likely culprit if the connector is damaged or loose on the battery cable itself.

Was this answer helpful?

Yes No

Score 1

2 Comments:

thank you for your answer

it isn't bent but has some bumps on the corners.

i will try unplugging and plugging later and report if it worked or not.

unplugging and plugging in again all connectors worked

thank you

Samsung Galaxy S6