pads layout of schematic is wrong?
If pads is wrong, somebody give me a right one
Thank..
Is this a good question?
If pads is wrong, somebody give me a right one
Thank..
Is this a good question?
The trace highlighted in yellow is correct and also shows up identically in ZXW Tools.
Was this answer helpful?
But the number 2 fl2343 connect to number 1 c2303 and c2304 in schematic but in ZXW tool number 1 fl2343 connect to c2303 and c2304?
I bit confuse about that.
None of those components are "directional" so it doesn't matter.
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 100