The second generation of the iPad with Wi-Fi, GSM and CDMA models. Some models were refreshed before the iPad 3. Repair is difficult and requires heat and prying.

885 Questions View all

Why is there a horizontal line of missing touch feedback

I have replaced a digitizer for a client, and he later brought it back saying the touch screen was acting weird. Upon testing i have been able to conclusively say that on the bottom of the screen, about a centimeter above the home button. the digitizer loses its sensitivity. After about another cm it regains it and works as normal for the rest of it. I have checked the connector. Is the part defective? Any suggestions on how to fix it?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

If you double checked the connectors and are confident that the logic wasn't damaged, then yes, it's ost likely a defective or damaged replacement digitizer. If you have access to another digi, try it to see if it eliminates the problem.

Was this answer helpful?

Score 2
Add a comment

Add your answer

Anders Eklof will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 16

All Time: 23