iPhone 6s digitizer does not work after installing a new screen
iPhone 6s digitizer does not work after installing a new screen
Is this a good question?
Score
0
462293
3 Answers
Rep: 483
3
1
1
Evry time this happens to me I have not connected the wiring properly. Dissasemble and re assemble.
Was this answer helpful?
Score
0
Rep: 263
6
10
2
Try again as mentioned above. Concentrate on the connections. Either that or the screen was bad to begin with or was damaged during installation. It really pays to take your time, if you are not totally familiar with the tolerances. Some replacement screens unfortunately are better than others.
Was this answer helpful?
Score
0
Rep: 271
3
Most all replacement screens are refurbished. In the tech shop i work at about 1 in 10 are defective. so chances are (after reconnecting the pop connectors) that its a defective digi.
Was this answer helpful?
Score
0
