My macbook air 13 inch felt from my lap, and the aluminium case at the back of the screen has now a dent on the corner.
Do you know how to remove the dent? Do I need to disassembly completely?
Is this a good question?
Rep: 479.3k
35
329
971
Sadly, The design of the lid is not designed to be that serviceable! Here's an older display to give you an idea how yours is constructed: MacBook Pro Retina Display Teardown.
Best to just replace the complete display assembly: MacBook Air 13" Early 2015 Display Assembly Replacement
Guide
Difficulty:
Moderate
Guide
Difficulty:
Moderate
—
45 minutes - 2 hours
Was this answer helpful?
Rep: 263
6
10
2
I would not bother. Unless you have serious stoved in the corners or cracked the screen. It is easy to brake other components if you are not experienced repairer. I would put a sticker over it or get a vinyl wrap.
If you have don't have applecare but have full contents insurance on house you might be covered for electronic goods incidental damage.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 1
Past 30 Days: 5
All Time: 2,990
1 Comment
Do you have AppleCare + ?
If you do Apple will replace the display assembly for a fixed cost which is still cheaper than getting a new display your self and putting it on.
by Dan