Released on September 19, 2014, this 4.7" screen iPhone is the smaller version of the iPhone 6 Plus. Identifiable by the model numbers A1549, A1586, and A1589.

4602 Questions View all

Do I NEED a heat gun to replace screen?

Going to do a screen replacement on an iPhone 6.

I've been watching some videos and looking and guides about how to do it.

People have been saying to use a heat gun to remove adhesive on certain areas.

Do I need to use a tool to remove the adhesive? Could I not just run very carefully with a tool, such as a spudger?

If not, would a hair dryer work?

Can't get a heat gun within a couple of days.



Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

Browse Our Store

2 Answers

Chosen Solution

if your replacing the screen you dont need heat follow this guide and you should be fine.

iPhone 6 LCD and Digitizer Replacement

Was this answer helpful?

Score 0
Add a comment

Block Image


Says about an iOpener here, which I can’t get right now. But don’t particularly want to use a hair dryer.

Was this answer helpful?

Score 0


you only need a suction cup which i dont even use, i use an isesamo tool and go under the lcd down at the bottom an twist it


Okay thanks!


Add a comment

Add your answer

Sam Mileberg will be eternally grateful.
View Statistics:

Past 24 Hours: 15

Past 7 Days: 79

Past 30 Days: 315

All Time: 2,972