Skip to main content

Repair information and guides for the iPhone 6 Plus that was released on September 19, 2014. Model: A1522, A1524

1525 Questions View all

LCD shield plate screw size

The tools list for the 6 plus screen replacement guide specifies a phillips #000 screwdriver, but I’ve seen many sources (including the ifixit guide) that indicate #00 sized screws for the LCD shield plate. I can't get these screws out. Can someone please confirm for me the actual size of the LCD shield plate screws? Also, I see the screwdrivers come in a blunted tip and a pointy tip version. Which should I get?

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Hello,

you need Phillips #000 Screwdriver. You can buy it at Ifixit and if you buy tools from Ifixit you gain lifetime warranty and for phone parts it's mostly 1 year. So if you are buying i advise Ifixit (links below). Also link for iPhone 6 LCD Shield Plate Replacement.

iPhone 6 LCD Shield Plate Replacement:

iPhone 6 LCD Shield Plate Replacement

Phillips #000 Screwdriver:

Phillips #000 Screwdriver

Or the whole toolkit:

Essential Electronics Toolkit

Phillips #000 Screwdriver Image

Product

Phillips #000 Screwdriver

$5.49

Essential Electronics Toolkit Image

Product

Essential Electronics Toolkit

$29.95

Was this answer helpful?

Score 0

2 Comments:

Thank you. I would still like to get feedback from others as there is conflicting information on this site.

by

136 users completed this guide and for all of them it worked.

by

Add a comment

Add your answer

Sidney Burton will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 957