Fix Your Stuff Community Store

The Panasonic Lumix ZS50 is a small, lightweight personal travel camera, released in March 2015. The ZS50 features a long lens (30x zoom, 24-720mm), heightened low-light sensitivity, built-in viewfinder, and a 12.1 megapixel resolution.

7 Questions View all

Options

When I zoom in a little, the view becomes blurred.

At first, the view is in focus. After I begin zooming in very much (yes, I can hear the motor) the photo view becomes blurry. (I see 1.6 across the screen) If I try zooming back out all the way, the photo view stays blurry; however, if I turn off the camera and on again, the photo view again is clear until I try zooming in very much I have reset to factory and that did not change the problem. Yes, I am a novice.

Answer this question I have this problem too

Is this a good question?

Yes No
Score 1
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

If your camera is on AF-S, half-press the shutter button to refocus. If it is in AF-C, it should focus automatically, but always half-press the shutter button before taking the picture to be sure the picture is in focus. Be sure pre-focus is on if your camera has that setting.

Here is the manual if you need any help:

ftp://ftp.panasonic.com/camera/om/dmc-zs...

Hope this helps!

Was this answer helpful?

Yes No
Score 2
Add a comment

Add your answer

Sara Thomas will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 133

All Time: 1,271