Leak. I'm not sure if it's the tub or something else.
First, thanks for taking the time to read this.
Noticed the floor around the washer was wet. I tried testing how it behaved by triggering the different parts of the cycle.
While filling up, I noticed it would leak somewhat. During the spin cycle, wasn't necessarily worse.
No water on the back of the machine, the hoses seemed dry.
So. I decided to fill up the tub partway, put a little bit of detergent in it and let it just hang out.
Came back an hour later and there it is. Soapy water on the floor, not so much in the tub.
Reading some other questions and their answers, I wanted to try to narrow it down as much as possible before taking the whole thing apart or hiring someone.
Any help is most welcome!
Is this a good question?