Released on September 19, 2014, this 5.5" screen iPhone is the larger version of the iPhone 6.

1245 Questions View all

iPhone 6 plus no turn

HELLO TEAM

I HAVE AN IPHONE 6 PLUS WITH SHORT CIRCUIT

WHEN I CONNECT POWER SUPPLY HE BIP AND

APPLY FREEZE AIR = Q1403 IS SHORT CIRCUIT

I REMOVE Q1403 BUT NOT LIGHT WHEN I TAPPED ON POWER (SEE PICTURE 1)

I ALSO REMOVED THE C1417 (SEE PICTURE 2)

ALWAYS THE SAME

Block Image

Block Image

CAN HELP ME PLEASE THANK YOU

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Hi Mike. Which voltage rail has the short; is it VCC_MAIN or BATT_VCC? Q1403 rarely goes bad and by design, it will almost always heat up first when testing for shorts with freeze spray as that's where the current flows in order to charge the battery.

Q1403 is a power MOSFET (P-Channel enhancement mode MOSFET) and it acts like a switch.

  • PP5V0_USB gets converted to ~4.25V by the internal Buck converter in Tigris to create PP_VCC_MAIN.
  • CHG_ACT_DIO will go low (0V) when it detects something in the charge port.
  • VCC_MAIN & BATT_VCC are connected together via Q1403 and battery charging occurs.
  • When the battery is fully charged, CHG_ACT_DIO goes high and cuts the connection between PP_VCC_MAIN & PP_BATT_VCC.

Was this answer helpful?

Score 3
Add a comment

Add your answer

Mike Plouvin will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 4

Past 30 Days: 18

All Time: 104