1 My motor stage broken?
it is saying that my motor stage is broken.....can you help
Is this a good question?
Score
2
434165
3 Answers
Most Helpful Answer
Rep: 49
1
Not connected to one or all motors. Broken cable, connection not seated correctly, (Push Fit) and connection under arms damaged.
Was this answer helpful?
Score
4
Rep: 13
1
I have this issue.
Do I really have to go through the process of taking everything apart in order to fix this?
Was this answer helpful?
Score
1
Is this un fix able? also the other thing is it wont turn off with the press of the button, I have to unplug battery to turn it off.
As @https://www.ifixit.com/User/3081968/Mich... pointed out this is one or more motor connection issues.
As per https://www.ifixit.com/User/3695100/swiv... from flight app view, we can find which motor is not connected as it’s red.
For me even though how hard I pushed the connector it did not work properly. The connector was loose. (even though I connected a different motor it did not detect by the motherboard.) I used my multimeter ohms scale which has around 1 Ohm per each of 3 pins. I removed the motor connector and sold it directly to the motherboard :). Did the trick for me and saved some money and time as well.
Was this answer helpful?
Score
0
The motor turn just a little when I first turn on though but then goes to motor stage error
2 Comments
Same problem, though i suspect its the brushes in the motor( a piece that uses electricity to spin the motor and magnets). And my wire on the leg of the drone broke.
by TL gaming
I have same problem but when I turn it on the perpellar acts like it wants to spin a sec then red-light comes on
by James Smart