Released September 25, 2015. Model A1688/A1633. Repair of this device is similar to previous generations, requiring screwdrivers and prying tools. Available as GSM or CDMA / 16, 64, or 128 GB / Silver, Gold, Space Gray, or Rose Gold options.

878 Questions View all

iPhone wont turn back on after screen replacement.

Recently, my daughter dropped my iPhone on the floor and completely cracked my screen, my phone was already on 1% due to me not charging it that day, however as my daughter dropped it, it had long line going down the screen which told me the screen was broken,

As I thought the battery was dead I went back home and charged it, and it wouldn't turn on,

I ordered a new screen replacement and completed this myself and it didn't work, wondering if anyone has any suggestions on why this might be?

Thanks.

Answered! View the answer I have this problem too

Is this a good question?

Score 0

Comments:

when you put the screen on did you make sure the battery was reconnected properly

by

Add a comment
Black Friday
Broken doesn't stand a chance.

2 Answers

Chosen Solution

Is your phone recognized if you connect it to an iTunes enabled computer? If so, then you may just have a bad replacement screen.

If the phone is not recognized, then either you have a logic board issue that was caused by the drop or perhaps the screen is causing issues. The best way to troubleshoot that is to disconnect the screen, cameras...everything except the battery and Dock. Then connect to iTunes. If it is not recognized, then you most likely have a logic board issue. This would require a micro-soldering repair and is not a DIY fix.

Was this answer helpful?

Score 2
Add a comment

Ok, try to reseat the battery connector in the logic board...

also you can try disconnecting the battery, and plugging in the adapter... and see what happens..

Was this answer helpful?

Score 0
Add a comment

Add your answer

John Young will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 11

All Time: 34