After getting my heater core replaced my turn signals, hazards lights
Lights not working ,and my security lock is staying on what could cause this issue
Is this a good question?
Lights not working ,and my security lock is staying on what could cause this issue
Is this a good question?
Hi NiccolleW,
Replacing a heater core is a pretty labor intensive job and requires a lot of the vehicle electrical connections be disconnected.
I would first check the interior fuse box to see if the fuses are good, 7 and 11 are for the turn signals.
Next I would check and make sure that the turn signal and hazard lights are plugged in.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 1
All Time: 135