I replaced the charging connector cable on my Galaxy s6 now it does not power on. At first screen flashed like it wanted to power on then dies. I charged it red led goes green when fully charged, try turning on nothing. Blue status led flashes...but phone does not turn on. Any thoughts what can it be?
Is this a good question?
Rep: 8.3k
5
10
24
The comments above are right on it. Noticeable life in the unit, screen flash, LED lights displaying. You have to get a new LCD/Digitizer for the unit.
Was this answer helpful?
Rep: 159.7k
11
191
368
Yep screen got physically damaged after lifting it up to replace the charging daughter board.
I generally lift up the charging board, shield the surrounding components carefully and replace the charging port using a rework station with soldering.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 2
All Time: 200
2 Comments
Honestly sounds like the LCD got cracked when you had to lift it. Only other thing I could think of is that there is a component on the board that went bad/damaged
by Elliot
Because of the screen flash I agree with elliot, thats exactly what a damaged screen will do.
by joel rakich