Skip to main content

The third generation of the Apple iPad, released on March 16, 2012. Full 4G and Wi-Fi model repair guides. Repairs require heat and careful prying. Model numbers: A1416, A1430, and A1403.

318 Questions View all

home button not working but work if I jump the 2 prong

hi replace an digitizer of an ipad 3th and the home button is not working but if i jump the 2 gold prong where the home button make is contact the lcd open...

i tried an other home button and usb flex same problem

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Most Helpful Answer

Hello, most commonly, the home button module on the digitizer is not aligned properly. It is important to check the orientation of how the old home button was installed on the old or original digitizer that was removed. If you have aligned it properly, I would highly recommend for you to order a new home button.

Was this answer helpful?

Score 1
Add a comment

Check the bracket placement and that there's no adhesive over the edge keeping the button from sitting too high causing no contact.

Was this answer helpful?

Score 0
Add a comment

Add your answer

Reparactif will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 56