Skip to main content

The Kenmore 110 Series is an easy to use home Washing machine created by Kenmore.

445 Questions View all

My Kenmore washer won't spin.

It fills up with water n then it does to spin cycle. It sounds like it's spinning but the middle piece inside don't spin at all so when it drains it don't drain all the water out.

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Most Helpful Answer

If your Kenmore 110 Series Washing Machine refuses to spin or agitate during the wash cycle, see the Kenmore 110 Series Washing Machine Doesn’t Spin or Agitate problem page for possible causes and solutions.

Cause 1

Lid Switch Assembly

The lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer will not spin. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. If the lid switch does not have continuity, replace it.

Cause 2

Motor Coupling

The motor coupling connects the motor to the washing machine transmission. If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission. The motor coupling can also fail due to normal wear. Inspect the motor coupling to determine if it is broken. If the motor coupling is broken, replace it.

Cause 3

Drive Belt

Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it.

Was this answer helpful?

Score 1
Add a comment

Might be the drive belt.

Kenmore 110 Series Washing Machine Drive Belt Replacement

Was this answer helpful?

Score 0
Add a comment

Add your answer

Crystal Murray will be eternally grateful.
View Statistics:

Past 24 Hours: 2

Past 7 Days: 17

Past 30 Days: 69

All Time: 8,625