Released on September 19, 2014, this 4.7" screen iPhone is the smaller version of the iPhone 6 Plus.

3049 Questions View all

iPhone 6 with no image after screen replacement

I've been fixing iPhones for a while now with no problem. This time that I fixed it for a friend i replaced it with no problem it turned on and everything and about a week later the phone just went black but it is recognized when I connect it to iTunes. Could it be the logic board that was damaged? The phone has never been wet either.

Answered! View the answer I have this problem too

Is this a good question?

Score 1
Add a comment

3 Answers

Chosen Solution

Have you checked the connector on the logic board? Check whether it is in good condition and clean it with Alcohol cleaning fluid to have a try.

Was this answer helpful?

Score 2

Comments:

I will try this thank you

by

After trying this multiple times it finally worked

by

Add a comment

Can you verify if it's no image or no backlight? Try shining a light on the screen and see if you can see anything. If so, it could be a problem with your backlight circuit.

Was this answer helpful?

Score 1

Comments:

There was light at first looked kind of purple but then just went out

by

Add a comment

This happend to me but on a different phone. The screen is broken talk with your seller

Was this answer helpful?

Score 0

Comments:

I thought it might be that too but i tried 3 different screens and one original that just had a crack

by

Add a comment

Add your answer

Alex will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 12

Past 30 Days: 54

All Time: 54