Fix Your Stuff Community Store

Repair information and guides for the fifth generation of iPhone. Model: A1387

2191 Questions View all

Options

No Display after replacement even old one has the same problem

I replaced my iPhone 4s with a new display following the guide on iFixit. When i powered it on it showed display but was a little distorted. And i also discovered the home button not working so i disconnected and checked the home button but found it to be okay. i reassembled everything all connectors and screws, powered it on the 2nd time but this time it doesn't show any display at all. But when i connect on computer it shows that it is on

I tried re-installing the old screen but still the same problem

please help!!

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

First try refitting and make sure that both the flex cables are seated correctly.

With the iPhone 4/4s, the flex cables have to be bent correctly in through the metal mid frame.

If you bend them too much it will damage the flex cables.

It could be that.

Try another screen but pay attention to how you feed the cables through the mid frame.

Good luck!

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

Mel will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 27