Skip to main content

Repair information and guides for the iPhone 6S Plus that was released on September 25, 2015. Model A1687, A1634

1041 Questions View all

cracked screen gone totally black

Hello

i need help with knowing what to buy to fix my iphone 6s plus A1687

my screen cracked about a year ago, but it was working normally, with all functions even 3D touch and all

about 3 months ago, my earpiece started to fail, i could barely hear anyone who calls me, i had to open speaker phone, but the screen was working OK

2 days ago, i was talking on my phone using my headset, and suddenly the screen went black, i tried to restart my iphone and that's it, the screen isn't working anymore, i tried calling my phone from another phone and the caller phone gives a ringing tone, but the broken iphone doesn't ring or anything, tried to flick the silent button on and off, still no ring or anything

tried to hold both buttons for 15 seconds, nothing

tried to connect it to itunes, passlocked, wasn't even able to backup

i know that i need to replace my screen

but what else should i consider buying with the screen ?? as im really paying so much for this to ship to here (( Egypt )

thanks in advance

Nour Eddien

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

What you should buy just in case to make sure that you can get everything working (Make sure all 6s plus model replacement parts):

- iPhone 6s Plus replacement screen

- Earpiece (Top speaker)

- Front Facing Camera Assembly

- Home button extension cable with metal plate

And I think that's pretty much it.

If everything goes out well for you, you may be able to just get away with just needing to replace the screen and transfer the parts from the old screen.

A lot of the time the screen screws get loose over time from dropping the phone a lot (usually after the screen has been replaced at least once and other parts behind screen get loose).

Was this answer helpful?

Score 4

4 Comments:

thanks for your answer,

last time i used the phone before it breaks dead, the Front Facing Camera Assembly and the home button was working fine, do you think it could break with the screen ?

and is iPhone 6s Plus Screen enough ?

and what about my 3D touch ?? is it already assembled in the link i sent ?

P.S: i dont have any tool or equipment to disassemble an iphone, so i think im gonna buy everything i need from here ...

by

3d touch comes is part of the screen so it will come with it.

If you don't have exposed cables at the top of the screen or cracked glass missing then most likely the front camera assembly and the rest of the parts that connect to that assembly are fine to reuse to replacement screen.

by

actually there is some glass missing, but i had a screen protector on it, but there is some dust as well,

but last time i used the phone it was working great

by

Should be okay rarely the front camera ribbon cables get cut from glass.

by

Add a comment

Add your answer

Nour Eddien Aboullaban will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 111