Skip to main content

Fixes and troubleshooting for all kinds of UAV problems.

770 Questions View all

Apex x100 Camera won't record

Everything about my drone works fine except for the fact that video and picture won't be recorded onto my sd card. The drone recognizes that the sd card is there, I've tried multiple different mini sd cards. The drone responds to remote commands and flashes lights when input is made, and I have visual connection from my FPV screen. I've opened up the camera and all wires are connected as far as I can tell. It just wont record anything, if you know what might be wrong please let me know

Answer this question I have this problem too

Is this a good question?

Score 3
Add a comment

2 Answers

My Warhawk drone won’t go past step 6 on setup &synchronization

Was this answer helpful?

Score 0

3 Comments:

Same here....everything calibrates except step six at the 45 degree turning...the lights won't stop flashing

by

It comes with its own memory card already

by

mine either, does the camera angle button work? mine does not change the camera angle and the one button take off does not work...

by

Add a comment

Did you check what format the card is in? I,me not sure what the drone requires I think it is Fat32. That is what most memory cards are

Was this answer helpful?

Score 0
Add a comment

Add your answer

Reuben will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 6

All Time: 233