The Canon PowerShot SX160 IS is a 16.0 megapixel digital camera with a 16x wide-angle optical image zoom and a 3.0 inch LCD.

17 Questions View all

Display of message that says 'change the batteries'

My camera keeps displaying a message that says 'change the batteries'. Why is this?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

@tyiilliamani, Kenzo , Ensure that the battery contacts are clean and install a new quality set of fully charged batteries and if using rechargeable's have charger tested or try another known good working compatible charger to rule it out as an issue. Possible internal clock battery may be faulty (change internal CR1220 battery) or issue with bad components in camera. Find below links to showing the internal clock battery replacement and partial disassembly guide to enable checking of internal wire connections/components/etc. to check for loose, damage, burnt. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.

Canon PowerShot SX160 IS Clock Battery Replacement

Canon PowerShot SX160 IS Outer Case Replacement

Canon PowerShot SX160 IS Clock Battery Image

Guide

Canon PowerShot SX160 IS Clock Battery Replacement

Difficulty:

Moderate

15 - 30 minutes

Canon PowerShot SX160 IS Outer Case Image

Guide

Canon PowerShot SX160 IS Outer Case Replacement

Difficulty:

Moderate

Was this answer helpful?

Score 1
Add a comment

Add your answer

Kenzo will be eternally grateful.
View Statistics:

Past 24 Hours: 4

Past 7 Days: 23

Past 30 Days: 70

All Time: 583