water damaged iPhone 6.
Hello @refectio! I have water damaged iPhone 6. It is cleaned and there are missing C0633. There was also vvc_main short in ground in board so I take one cap that was caused the short (C3220_RF) and now the short is released. I also take off two caps that was short to ground (C1695 and C1433) but they are not in vvc_main. I blugged it without all those caps to charger and tested it with multimeter and it gives me 3.5v and booted up to lockscreen. Then I blugged it in charger and it turned off. then I tested the charging line and now it give only 1.5v and not turning on anymore.. Do you think that it was mistake to blug it in charger without all those caps? And what to do now.. putting all those caps on and probably new tristar maybe?
Short to ground line
Is this a good question?