Skip to main content

Released 2015, identified by model number Z812.

55 Questions View all

Screen spazzing out or just becoming irresponsive

A week ago, my zte screen stopped working entirely. A day after factory resetting it, it started to work again, except this time the screen would either not work or random spots on the screen wold be pressed or held when i am not touching it. The only way that I can make it work is to close the screen by clicking the power button and even then it only works for about a minute before the random pressing begins. Everything else on the phone works except for the touch part. At the time that this started the phone had no water damage and had not been dropped

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Most Helpful Answer

Try to re-seat the digitizer connector and see if that's it. If not, it think it would need a new digitizer.

Was this answer helpful?

Score 1
Add a comment

Add your answer

Keshawn Freeman will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 246