mower dies when park brake released
why does my Lawn Mower Craftsman ZT7000 die when park brake is released
Is this a good question?
why does my Lawn Mower Craftsman ZT7000 die when park brake is released
Is this a good question?
C Musselman the usual cause for that is a failed seat switch. you can test the switch with either a multimeter or by placing a temporary jumper on it. This is an important safety feature and applying a jumper should only be done for diagnostics.
the seat switch is part number 11 in the diagram
Was this answer helpful?
I pulled the safety seat cable and put a jumper wire across the contacts, but it still shuts down when I release the parking brake.
Was this answer helpful?
Was right there with ya, checked all the switches etc... but turns out the spark plug boot was split and the spark was occasionally jumping to the engine sending current through the ground throwing off all the switches... taped it up and it runs fine now...
Was this answer helpful?
i have a poulan pro i have replaced seat switch and brake switch with new and i still can keep my mower run when i take my foot off brake
Was this answer helpful?
can anyone help me
Past 24 Hours: 2
Past 7 Days: 38
Past 30 Days: 126
All Time: 7,306