The wi-fi only version of Apple's iPad Air, model number A1474. Available in Space Gray or Silver, it packs the custom A7 processor and ships in 16, 32, 64, and 128 GB configurations.

150 Questions View all

Digitizer cable connector stucked in the logic board socket

Hi,

I did get digitiser replacement. I connected digitiser cable connector to the socket. Suddenly, cable went off but cable connector stayed in the socket on the logic board. Any idea how to remove it safely please?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

3 Answers

Chosen Solution

I'm a bit miffed, and it appears no one else answered this. So you removed the plate, and attached the new connector cable? And it broke off? If that's the case, scoop, don't pry, the new connector cable off the socket, then return it. There's something wrong with that cable, if it's breaking like that. Get it exchanged for a good one. Don't take no for an answer!

Was this answer helpful?

Score 1

Comments:

was writing my answer just as you posted yours ;) I didn't think of the hows and whys though...

by

Add a comment

You can try heating it up gently with a hair drier..possibly the heat will cause some metal expansion that will make it easier to remove. In any case a moderate heat will provide a slightly better flexibility and help prevent breaking of parts.

Was this answer helpful?

Score 1
Add a comment

Hi guys,

Thanks for your advice. As you can see, English is not my first language. I try to modify my question and add pictures..

Was this answer helpful?

Score 0
Add a comment

Add your answer

Bretislav Kaluzik will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 52